Invert Rows

If selected, rows are generated with geometries starting from right to left instead of left to right, which is the default.

Invert Columns

If selected, columns are generated with inverted geometries.

Rotate 90

If selected, rows are displayed vertically instead of horizontally.

Geometry Rotation

The rotation of the geometry in radians.

Invert Scan X

Select this check box to display block row numbering in descending order for block scan view in XPS.

Invert Scan Y

Select this check box to display block column numbering right to left for block scan view in XPS.

Compress Scan

If selected, rows are aligned in the stack and display a single column label area in the Yard View window. Otherwise, N4 labels each row and causes the window to be larger.

Stack Length in Pixels

The length of a slot, in pixels, as it appears in the Yard Block window.

Stack Width in Pixels

The width of a slot, in pixels, as it appears in the Yard Block window.

Pixels Between

The number of pixels displayed between the rows.

Direction

The direction that the block points as the Row Idx increases for non-straddle blocks. For straddle blocks, select the direction that the block points as the Column Idx increases.

You configure this value on the Display tab of the Stack Block form (on page 1) in the Yard Editor.

Grid Rotation (Extends East or North)

The rotation of the GRID radians (Live View).

Max Stack Height

The maximum stacking height allowed, in centimeters.

40' Extends Ascending

Controls the visibility of containers in the XPS client. If selected, the icon of a 40' container is visible in the lowest 20' slot of the two 20' slots that are occupied by the 40' container, while the highest (or Ascending) 20’ slot displays the extension, ‘+’. When not selected, N4 extends 40' containers in descending direction (down from the planned position).

Default Space Between Rows (cm)

The default space between rows, in centimeters.

Default Space Between Columns (cm)

The default space between columns, in centimeters.

Default Row Width (cm)

The default row width, in centimeters.

Default Column Width (cm)

The default column width, in centimeters.